What kind of transmission fluid does a BMW 328i take?

  August 21, 2019
      No Comments

What kind of transmission fluid does a BMW 328i take?

Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.

What type of transmission fluid does BMW take?

ATF Dexron III is the fluid standard for 4-speed BMW automatics (ZF 4HP). This is also the most common ATF you will find at auto parts stores (it’s compatible with most GM and Ford auto transmissions).

How many quarts of transmission fluid does a BMW 328i take?

For Automatic Transmission: GA6-L45R….AF6

Notes: BMW P/N 83 22 2 163 514
Capacity: 6 speed GA6-L45R Total Fill 10 quarts

What type of oil does a 1997 BMW 328i take?

Engine Oil

Viscosity: 10W-30 (-20 To 10) 10W-40 (-20 To 20) 15W-40 (Above -15) 5W-20 (Below 0) 5W-30 (Below 10)
Capacity: 6.9 quarts. . . . (with filter)After refill check oil level.
Torque: M12x1.5 – 19 ft/lbs (Oil Drain Plug) M18x1.5 – 26 ft/lbs (Oil Drain Plug) M22x1.5 – 45 ft/lbs (Oil Drain Plug)

How do you check the transmission fluid on a BMW 328i?

Our Guide to Checking Your Transmission Fluid

  1. Turn the engine on for a few minutes before you check the level.
  2. Locate the transmission fluid dipstick.
  3. Remove the dipstick and touch the fluid.
  4. Use a rag to wipe off the dipstick.
  5. Use a funnel to properly fill the vehicle, taking care to avoid overfilling it.

What kind of transmission fluid does a 2008 BMW 328i take?

Valvoline Synthetic Transmission Fluid Dexron VI 1 Quart.

How much transmission fluid does a BMW hold?

A ZF 6-speed automatic transmission in a BMW has a filter that is part of the plastic oil pan so basically you are replacing the oil pan. To do this job you will need to order a transmission pan, 7 liters of proper fluid and a fluid hand pump. 1.

How many quarts does a BMW transmission take?

Just the pan drop should be 3-4 quarts. I took me 12 quarts to flush all the stuff from transmission and torque converter by disconnetcting the transmision cooling lines.

What oil does a BMW E36 take?

E36 M3s produced up to early 1999 came with BMW’s Mineral Based Dino 15W-40 engine oil, while those produced at the end of 1999 came with the company’s Longlife 5W-40 (synthetic). Taking this into account, it is generally recommended that you use a good quality 0W-40 or 5W-40 (most recommended) engine oil.

How do you know if your BMW needs transmission fluid?

Here are five signs that your BMW needs transmission service.

  1. Rough Idling and Odors.
  2. Slipping Transmission.
  3. Leaking Fluid.
  4. Poor Shifting and Accelerating.
  5. Check Engine Light is On.
  6. 3 Full-Service European Auto Service / Repair Shops in Dallas and Plano.