## What is dilation in math?

A dilation (similarity transformation) is a transformation that changes the size of a figure. It requires a center point and a scale factor , k . The value of k determines whether the dilation is an enlargement or a reduction. If |k|>1 , the dilation is an enlargement.

## What is a scale factor of 4?

The scale factor is the ratio of the length of a side of one figure to the length of the corresponding side of the other figure. Example: Here, XYUV=123=4 . So, the scale factor is 4 .

**What is a scale factor in math in 7th grade?**

VOCABULARY. ● Scale Factor: The ratio of any two corresponding lengths in two similar. geometric figures. ● Corresponding Angles: Angles in matching locations of two shapes.

**What is a 1 30 scale?**

> No, 1:30 is a unitless ratio and means just what it says, 1 “anything” > equals 30 of the same “anythings” – so 1 inch = 30 inches, 1 mm = 30mm, etc.

### Can we create scaled copies by adding or subtracting the same value from all lengths?

To draw a scaled copy of a figure, we need to multiply all of the lengths by the scale factor. We saw in the lesson that adding or subtracting the same value to all lengths will not create scaled copies.

### What are scale model sizes?

Models come in a range of scales, the most common being 1:4, 1:8, 1:12, 1:16, 1:18, 1:24, 1:48, and 1:72. Choosing a scale that works for you is the first big step in mastering your model builds.

**Is figure BA scale copy of Figure A?**

A scale copy of a figure is a figure that is geometrically similar to the original figure. This means that the scale copy and the original figure have the same shape but possibly different sizes. In real life, a scale copy is often smaller than the original figure.

**What size is 1.16 scale?**

about 30 cm

## How many inches is 1/16 scale?

Every inch on the replica equals 16 inches on the real tractor. The larger the scale, the smaller the denominator; a 1/16 scale toy is much larger than a 1/87. “Scale” doesn’t refer to actual size. For example, a 1/16 scale toy could measure 8, 12, or 14 inches long.

## What is the scale factor for 1 20?

Select the desired scale. 1″ = 20′ Multiply the feet by 12. 20 x 12 = Scale Factor 240.

**What is a scale factor of 2?**

If you multiply each side of the first trapezoid by 2, you get the lengths of the sides from the larger trapezoid. This means the scale factor is 2. You can also see that it’s two by finding the ratios: 14/7 = 2, 10/5 = 2, 16/8 = 2.

**What is a 1/4 scale?**

A 1/4″ scale means that each 1/4″ (inch) on the plan counts for 1′ (feet) of actual physical length. To scale a blueprint in imperial units to actual feet. multiply the measurement on the drawing (in inches decimal equivalent) with the denominator.

### How do you start a diorama?

A quick overview of the Process of Diorama Making

- You create the frame of the diorama.
- You paint the basic colors on the landscape.
- Apply the major terrain textures like grass and water.
- Apply more detailed terrain textures like trees, bushes, stones etc.

### What is a scale of 1 20?

What does a 1:20 scale mean. The same goes for a 1:20 scale, which when used, represents a subject at a size 20 times smaller than its real word dimensions.

**What is 28mm scale?**

A 28mm scale miniature is designed in a way, where the average sized human is an absolute scale model that is 28 tall up to the chosen reference point. That reference point is often the top of the head, but most companies use the eye level as the reference point.

**What is a 1/2 scale?**

Full size on the metric scale is shown as 1:1. Half scale is 1:2. It is helpful to think of this as one unit on the drawing equals two units on the object. A small object can be enlarged on the paper and drawn in 2:1 scale. This means the drawing of the object is twice as large as the object itself.

## What size is 1.50 scale?

6.096 mm

## What is the scale factor of a triangle?

When two triangles are similar, the reduced ratio of any two corresponding sides is called the scale factor of the similar triangles. Figure 1 Similar triangles whose scale factor is 2 : 1. The ratios of corresponding sides are 6/3, 8/4, 10/5.

**What is the scale factor of 3 and 5?**

the scale factor is 3:5. this means: if you let x = the perimeter of the smaller polygon, and you let y = the perimeter of the larger polygon, then you get the ratio of x/y = 3/5.

**How do you do scale drawings?**

The scale is shown as the length in the drawing, then a colon (“:”), then the matching length on the real thing. Example: this drawing has a scale of “1:10”, so anything drawn with the size of “1” would have a size of “10” in the real world, so a measurement of 150mm on the drawing would be 1500mm on the real horse.

### What is a scale of 1 100?

A scale is shown as a ratio, for example 1:100. A drawing at a scale of 1:100 means that the object is 100 times smaller than in real life scale 1:1. You could also say, 1 unit in the drawing is equal to 100 units in real life.

### What materials do you need to make a diorama?

Making a Diorama – Chapter 1: Materials

- needle nose pliers/small hand cutters.
- scissors/masking tape.
- hob-e-tac glue or strong, fast setting glue.
- wood glue or elmers glue.
- bottle with holes in top for shaking out materials (this has the green material in it)
- scenic cement.
- empty all purpose spray bottle (blue)

**How do you convert to scale?**

To scale an object to a smaller size, you simply divide each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 60 cm, you simply divide 60 / 6 = 10 cm to get the new dimension.

**What is the biggest model scale?**

From front to back, the scales are: 1/144, 1/72, 1/48, 1/32, and 1/24. The smallest (1/144 scale) would be a little more than 2½” long; the biggest (1/24 scale), slightly more than 16″.

## What does Ertl stand for?

Educational Research, Technology, and Leadership