What oil does a Polaris Outlaw 525 take?

What oil does a Polaris Outlaw 525 take?

ATV Power SAE 5W-40 Synthetic 4T Engine Oil, by Motul USA®.

How many liters of oil does it take to fill up a Polaris Outlaw 525 2008?

The manual says to add 1.27 quarts of oil after draining the old oil. BUT the capacities section of the manual says the engine holds 1.9 quarts. I added about 1.3 quarts and the oil level is about 1/4 inch above the bottom of the sight glass.

What kind of oil does a Polaris Outlaw take?

Do it yourself with this POLARIS OEM Oil Change Kit This kit contains the following items: 1 x POLARIS 1 QUART BOTTLES PS-4 FULL SYNTHETIC ENGINE OIL 2876244 1 x POLARIS O-RING 0452371 Vehicle Fitment: 2008-2019 Polaris Outlaw 50 Free Shipping in the Continental United States.

How much oil does Polaris 50 Outlaw hold?

Clean any residual oil that may have collected on the vehicle. 14. Add 30 ounces (900 milliliters) of the recommended oil. A 1-quart (946 mL) bottle of PS-4 Extreme Duty Full Synthetic 10W-50 Oil is part number 2878920.

How much oil does a Outlaw 525 take?

2 Quarts of Polaris PS-4 Full Synthetic 4-Cycle Engine Oil.

What kind of oil does a Polaris Outlaw 50 take?

Synthetic Oil
2008-2019 Polaris Outlaw 50 OEM PS-4 Full Synthetic Oil Change Kit POL22.

Can I use 5W30 in my Polaris Sportsman?

You can run a 5W30 motor oil, as long as it’s synthetic.

What kind of fluid goes in a Polaris transmission?

AGL Advantage Polaris AGL Synthetic Gearcase and Transmission Fluid is a high-quality lubricant specifically designed for Polaris ATVs, Rangers, RZRs to maintain peak performance better than aftermarket fluids.

How fast does Polaris Outlaw 50 go?

Engine & Lubrication

Engine Type 4-Stroke
Compression Ratio 9.2:1
Starting System Electric/Kick starter
Displacement 49 cm³ / 2.99 in³
Top Speed 15 mph (24.14 km/h) – unrestricted

Can I use 10W30 in my quad?

It is advised to respect it. The engines are machined so that the chosen viscosity is most effective. In the example recommendation above, the manufacturer requires grade 10w30, so depending on the start temperature, 0W30, 5W30 or 10W30 would be good choices.