How do I reset my color control GX?

  October 25, 2020
      No Comments

How do I reset my color control GX?

There are two ways to do this: Via the reboot option in the settings menu: a. Find Reboot in the setup menu (Settings -> General -> Reboot) b. Initiate restart.

How do you connect the color control GX?

To connect the CCGX to a mobile (cellular) network, such as a 3G or 4G network, use a cellular router. Connect the CCGX to that router with either a LAN cable or the router’s Wi-Fi network. Make sure you use a router that is designed for unattended setups.

What is Victron Colour control?

The Color Control (CCGX) provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more.

How do I connect to CCGX?

There are several ways to connect a CCGX to the internet:

  1. Run a network cable between a router and the CCGX Ethernet LAN port.
  2. Connect to a router wirelessly using a USB Wi-Fi dongle plugged into the CCGX.
  3. Via the mobile (cellular) network, using the GX GSM – a cellular USB modem or, with a 3G or 4G router.

What is a GX device?

GX products are Victron’s state-of-the-art monitoring solution. Monitoring can be carried out locally and remotely – via our free-to-use Victron Remote Management portal (VRM). The GX-device also provides Remote firmware updates and allows inverter/charger settings to be changed remotely.

What does Victron GX do?

Introduction. GX products are Victron’s state-of-the-art monitoring solution. Monitoring can be carried out locally and remotely – via our free-to-use Victron Remote Management portal (VRM). The GX-device also provides Remote firmware updates and allows inverter/charger settings to be changed remotely.

What does the Victron Venus GX do?

The Venus GX manages Energy Storage Systems. It keeps back-up batteries at 100% ; kicks-in during power-cuts; and diverts excess (solar) power to self-consumption – saving you money.

How do I reset my Victron Venus GX?

How to reset a GX device to factory default settings:

  1. download the venus-data.
  2. copy the venus-data.
  3. boot with the usb-drive/sdcard inserted and wait until the GX Device has fully started up.
  4. remove the usb-drive/sdcard from the GX device.

How do I monitor my Victron remotely?

To use Remote Console, you will need a Victron GX device connected to the internet. You can confirm it is connected by going to Remote Console menu in the Setting menu of the GX device. There are more instructions in the Remote Console manual (See Section 4.3) if you get stuck.