How do I fix toner error on my printer?
- Open the front cover of the printer.
- Press the Clear / Back button.
- Press the * button.
- Press the 0 button.
- Press the 0 button.
- Close the front cover.
- This will clear the ‘Toner Low’ error and allow for continuous printing.
How do I reset my printer after toner?
Reset process
- Switch-off the printer.
- Press and hold the on/off button.
- When all the LEDs turn on, open the cover and remove the toner cartridge + drum unit.
- Release the on/off button.
- Re-install the toner cartridge + drum unit back into the printer and close the printer cover.
How do you reset a Xerox drum chip?
Reset the Drum Cartridge Counter
- From the Standby Mode, press the [Menu] (up arrow) button, then press [5], [2], [0], [4]. The screen will display: Change drum. Yes. No.
- Press [1], then press [Enter]. The screen will display: Completed.
- Press [Stop] to return to the Standby Mode.
Why does my printer keep saying no toner?
The No Toner message appears if the toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit. Reinstall the toner cartridge and drum unit assembly back in the machine.
Why is my new toner not working?
If your toner cartridges aren’t installed correctly, it can prevent your printer from functioning properly. Diagnosis: A toner cartridge is ajar, stuck inside the printer, or otherwise improperly inserted. The most likely fix for this problem is to take the cartridge out. If it’s empty, replace it with a new cartridge.
How do I reset my Xerox 3215?
Reset the Printer to Factory Defaults
- Log in to the control panel as a System Administrator.
- Press the Home button.
- Touch Device > Resets.
- To reset the printer to factory defaults, touch Reset to Factory Defaults.
- At the confirmation message, touch Reset.