What is quarter sawn maple neck?

What does this mean? “Quartersawn” is a woodworking term that describes a certain specific and non-standard method of milling lumber from trees. Quartersawn instrument necks are unusually strong, straight-grain necks superior to standard necks in almost every way.

How do I know if my neck is quarter sawn?

Cutting the neck blanks in a different orientation to the log will result in the neck having a different grain structure. You can see what your guitar has by looking at the top of the headstock. The image at the top of the page shows a Quarter Sawn neck on the left and Flat Sawn neck on the right.

Are Fender maple necks one piece?

The story behind a charming piece of Fender guitar anatomy. A one-piece maple neck/fingerboard with a skunk stripe was standard at Fender from 1950 to 1958, except for a few very early Esquire guitars that had no truss rod.

Does a maple guitar neck need to be finished?

Maple. Unlike Rosewood and Ebony maple fretboards do require sealing. In most cases this is in the form of Nitrocellulose Lacquer. If using lacquer, you will need to apply your finish and then cut away the build up on top of the frets, so the fret wires are exposed.

What are the advantages of quarter sawn lumber?

Some advantages of quartersawn lumber:

• Shrinks and swells less in width.
• Cups, surface-checks, and splits less in seasoning and in use.
• Raised grain caused by separation in annual rings does not become as pronounced.

What does quartersawn maple look like?

When maple is quarter-cut the figure appears as vertical flame lines. The same appears in Koa wood. However, the same figure appears curly when viewed on plain-sawn grain. In truth, the same vertical flame lines appear when quartersawn or plain-sawn.

Does Warmoth do one piece necks?

Notes. You can choose Modern construction on all Warmoth straight-headstock neck styles. *The Side Adjust Mechanism is not available on left-handed, Baritone Conversion, Bass6, or 7-string necks.

Should you oil a maple fretboard?

In general, maple fretboards do not need fretboard oil. On the rare case that your guitar has an unfinished maple fretboard, it can however benefit from a light application of fretboard oil 1-3 times a year.

What should I put on my neck maple guitar?

Use a dry, lint-free microfiber cloth to wipe grime and moisture from in between and around the strings. Loosen or remove the strings for a deeper clean or to apply a light guitar polish. Allow the polish to sit for a few minutes before wiping dry with another microfiber cloth.

Is maple fretboard better than rosewood?

Rosewood is also a more porous wood compared to the likes of Ebony and Maple so therefore offers a warmer, softer sound. THE VERDICT: If you want a warmer tone and softer feel, rosewood fretboards are the way to go.