What is the price of ball valve?

What is the price of ball valve?

Top Selling Ball Valves Price List in India

Latest Ball Valves Models Price Discount
Festo QH-1/4 10mm Brass Ball Valve, 9541 ₹704 52 % off
Festo QH-1 25mm Brass Ball Valve, 9545 ₹1777 52 % off
Festo QH-3/4 20mm Brass Ball Valve, 9544 ₹1405 52 % off
Festo QH-1 1/2 40mm Brass Ball Valve, 6837 ₹5933 52 % off

What is a flanged ball valve?

Flanged Ball Valves are 1-piece or 2-piece ball valves that provides effective control of oil and gas operations. Its defining trait is the flanged ends that bolt to oil and gas pipelines.

What is a 3-way ball valve?

A three-way ball valve has three ports or openings that are connected to piping or tubing for gas or fluid flow (media) to pass through. These ports are usually described as one inlet and two outlet ports or one outlet and two inlet ports depending upon the flow direction through the valve.

Why ball valves are normally flanged?

Flanged ball valves provide the ability to start and stop the flow of liquids and to change pipes without disrupting the entire line. The most basic ball valve has one inlet and one outlet with a straight hole bored through the ball. When rotated 90° the hole moves perpendicular to the passageway and blocks the flow.

How does a 3-way valve works?

A 3-way ball valve works by turning the handle, which rotates a ball in the valve body, to align the cut-out channels in the ball with the inlets and outlets of the valve. The “L” shape cut-out of the ball on an L-port valve sends fluid through 90 degrees from one port to another.

How much pressure can a ball valve hold?

The ball valve’s ease of operation, repair, and versatility lend it to extensive industrial use, supporting pressures up to 1,000 bar (100 MPa; 15,000 psi) and temperatures up to 752 °F (400 °C), depending on design and materials used. Sizes typically range from 0.2 to 48 inches (5.1 to 1,219.2 mm).

Do ball valves have a direction?

VALVE ORIENTATION: Ball valves may be installed in vertical or horizontal pipe runs, they are bi-directional therefore flow direction is not critical, however the best practice is to set up the valve handle to point in the direction of flow whenever possible.