Are Eazy pods good?

In general the water is really good and the pod itself is fairly easy too keep clean. I am not too worried by the dimensions, it does seem pretty compact considering the size of other filter systems. Though I suggest there are a few little issues with it that one should consider.

How much is K1 in Eazy Pod?

Easy to use filter system The EazyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod solely as a mechanical waste filter.

Are nexus filters good?

The Nexus has been around for many years now and has due to its ease of use and great reputation has been used on many ponds since its launch. This coupled with no mechanical or electrical components to fail make the Nexus an excellent choice for a robust, very good filter for all levels of pond keepers.

How does a Nexus Eazy Pod work?

As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter.

How much water does an easy Pod hold?

The central chamber holds 18 litres of static K1 Micro. As the water enters the central chamber, the fine smaller solids become entrapped in the K1 Micro.

How much K1 Micro media do I need?

How do I work out how much media I will need for my aquarium? In a moving bed chamber – You would want no more than 25% of the chamber to be filled with K1 as this allows enough water to help it to be fluidised properly.

Can a nexus 320 be pump fed?

The Nexus 320 features a re-designed Eazy filter which now utilises the all new K1 Micro filter media, in a static bed, to deliver improved levels of mechanical filtration. All Nexus filtration systems can be installed on pump fed or gravity fed setups depending on your pond configuration.

How does a Cetus Sieve work?

The Cetus sieve is a bow screen pre-filter, suitable for pre-filtration of any biological filter including all pressured filters. If pump fed, the sieve is placed above pond water level and then the exit water is gravity dropped into your main filter.

How many Litres does Eazy Pod hold?

18 litres
The size of the perforations will not allow large mechanical waste to enter the central chamber, thus acting as a first stage mechanical filter. The central chamber holds 18 litres of static K1 Micro. As the water enters the central chamber, the fine smaller solids become entrapped in the K1 Micro.

How do you use Easypod?

For complete information refer to: easypod Instructions for Use. When the device reads: Insert new needle, push the needle cap straight into the needle cavity until it clicks into place. The easypod will beep once. When the needle is successfully attached, the easypod will beep twice.

Which is better K1 or K3 filter media?

K1 is almost always better. It fluidizes easier and has more surface area, K3 is usually recommended for use when DIYing or retrofitting filters into moving beds since it’s larger size makes it easier to contain, but if you have the choice and aren’t worried about keeping it from escaping the filter, K1 wins.

How many Litres of K1 media do I need?

You would need roughly 260 litres, although less is more in one of those bio chambers. Try not to have it banging around toooo much.