What are the purposes of a post deployment site survey?
Post-deployment surveys also are often called validation surveys. The purpose of a validation survey is to ensure the wireless network deployed meets customer or client requirements. You should compare the validation survey to the predictive model previously performed.
What does AP stand for in survey?
Move the access point to the next location. Repeat steps 4-7 until all the necessary AP locations have been surveyed. After surveying all locations, use the Channel Planner to determine the optimal channel plan based on the surveyed data.
What is included in a site survey?
Site surveys might include: Existing buildings (including valuation, measured surveys, structural surveys, structural investigations, condition surveys, and demolition surveys). Geological and geotechnical. Topographical surveys, perhaps including laser scanning, Lidar or photogrammetry.
What is site survey in WiFi?
RF Propagation, Antennas, and Regulatory Requirements A wireless site survey is a physical survey of the premises where the wireless network will be installed. A site survey report helps visualize the wireless network coverage areas and data rates.
What is a site survey and why is it important?
Site surveys are inspections of an area where work is proposed, to gather information for a design or an estimate to complete the initial tasks required for an outdoor activity. It can determine a precise location, access, best orientation for the site and the location of obstacles.
What is a site surveyor?
Surveyors update boundary lines and prepare sites for construction so that legal disputes are prevented. Surveyors make precise measurements to determine property boundaries. They provide data relevant to the shape and contour of the Earth’s surface for engineering, mapmaking, and construction projects.
How do you do a site survey?
When conducting a site survey, consider these general steps:
- Obtain a facility diagram.
- Visually inspect the facility.
- Identify user areas.
- Determine preliminary wired and wireless access point locations.
- Verify access point locations.
- Document findings.
What are the different types of site survey?
Let’s take a quick look at a sampling of different types of land surveys available.
- Land surveying:
- Engineering Lad Survey:
- Layout Marking/Demarcation:
- Contour Survey:
- Boundary Survey:
- Construction Survey:
- Location Survey:
- Site Planning Survey:
What are the objectives of site survey?
To determine the relative position of any objects or points of the earth. To determine the distance and angle between different objects. To prepare a map or plan to represent an area on a horizontal plan.
How site survey is done?
Wireless site surveys are typically conducted using computer software that collects and analyses WLAN metrics and/or RF spectrum characteristics. Before a survey, a floor plan or site map is imported into a site survey application and calibrated to set scale.
What is the advantage of site survey?
Site surveys are essential to ensure desired operations by assessing the Radio Frequency (RF) and how it reacts in a specific location or environment. Without proper assessment and planning, there are range of issues that will crop up regarding poor coverage.
How do I use the AP for site surveys?
The AP can be powered using a PoE injector or a PoE switch and does not need to have wired connectivity to the internet. The survey SSID being broadcast from the access point can now be used to perform active/passive site surveys using any professional site survey tool. Examples include:
What is AP on a stick (APOs) survey?
An AP on a stick (APoS) survey is a pre-deployment survey where you are emulating the coverage of the actual AP you are planning to deploy.
How much time should you spend per AP location survey?
Plan for 1-Hour / AP APoS work can be cumbersome, expect to spend at least one-hour minimum for surveying each AP location. Having the right tools, like Ekahau Connect, will provide accurate data and help speed up your survey. 2. Get a Second Pair of Hands
How do I perform a site survey?
Site surveys should be performed using the same Cisco Meraki access point model as that would be used in the customer infrastructure. Ensure that the AP is not mounted close to any metal or concrete walls that can contribute to heavy attenuation of RF signals.