How much does it cost to have a well drilled in NC?
On average, a well costs around $6500-$7500. This includes all costs pertaining to drilling and the installation of the pumping system. Conditioning equipment is required in some cases and typically ranges from $1500-$3000.
How much do well drillers charge?
Well drilling costs $15 to $25 per foot for the drilling process only. Installing a complete well water system costs $25 to $65 per foot, irrigation wells run $50 to $100 per foot, and geothermal wells are $15 to $40 per foot. *Prices typically include drilling, pump, casing, and complete installation.
What is the average well depth?
In general, private home wells tend to range from 100 to 500 feet in depth. However, they can be much deeper than this in some cases. There are even some wells that go past the 1,000 foot mark. The average well depth in your area will depend on several factors.
How do I put a well on my property?
Use the well point method.
- Start a pilot hole. Using a post hole digger or shovel, dig a hole two feet deep.
- Install your well point. Well points are generally made of steel or any other hard metal so that they can withstand being driven deep into the ground.
- Begin driving the well point.
- Add each extension of pipe.
How Far Should a well be from a house?
Any contamination in your neighbor’s well can travel into your well. Some activities legally require more than a 50-foot zone of protection. As a general guidance, personal drinking water wells should have a minimum horizontal distance of at least 10 feet and preferably 25 feet from such boundaries.
What is too deep for a well?
In order to allow for maximum ground filtration to remove impurities, your well depth should be at least 100 feet. As a general rule, the deeper you drill, it’s more likely that there will be minerals present.