How do I reset my SonicWall TZ 215?

  January 2, 2020
      No Comments

How do I reset my SonicWall TZ 215?

Load factory default configuration on the Sonicwall TZ 215

  1. Power off the Sonicwall TZ 215.
  2. Using a pin hold down the reset button and power the Sonicwall TZ 215 on.
  3. Release the reset button once the wrench light begins to blink on the front of the Sonicwall TZ 215.

How do I reset my SonicWall NSa 220?

Use a narrow, straight object, like a straightened paper clip or a toothpick, to press and hold the reset button on the back of the security appliance for five to ten seconds. The reset button is in a small hole next to the console port or next to the power supply, depending on your SonicWALL security appliance model.

How do I reset my SonicWall TZ 205 to factory settings?

Open a Web browser on your computer, type “192.168. 168.168” into the URL box and press “Enter.” On the SafeMode Management display, click the boot icon on the “Current Firmware with Factory Default Settings” line. This will reboot the SonicWALL to its factory settings state and you can now reconfigure as needed.

What is the default IP for SonicWall?

192.168.168.168
SonicWall Default IP Address: 192.168. 168.168. Administration Credentials: admin | password.

How do I manually fail SonicWall?

To force Active/Standby Failover, click Force Active/Standby Failover. This option attempts an Active/Standby HA failover to the secondary unit. Use this action to test the HA failover functionality is working properly. When finished with all High Availability configuration, click Accept.

Why did my SonicWall reboot?

A system crash is where the firewall has detected an unrecoverable error and has restarted itself. Crashes can result from firmware and settings mismanagement, a misconfiguration, or even a firmware issue that can be addressed by following this article.

How do I reset my SonicWall 2400?

Push and hold the reset button for 10 seconds, then navigate to “http://192.168.168.168” in a web browser to reconfigure the appliance.

What is the default password for SonicWall?

admin
SonicWall Default IP Address: 192.168. 1.254. Administration Credentials: admin | password.