What type of sign is a fire exit sign?
Examples of fire safety sign categories
| Type of fire safety sign | Colour of sign |
|---|---|
| Safe condition and fire exit signs that highlight escape routes | Green with white writing and symbols |
| Fire equipment signs that direct people to extinguishers and hoses | Red with white writing and symbols |
What lane do you exit a roundabout?
left lane
What do warning signs tell you?
Warning Signs These signs warn you to slow down and be prepared to stop if necessary; a special situation or hazard is ahead. Some common warning signs are shown below.
What does a warning sign look like?
Most warning signs are yellow and diamond-shaped with black letters or symbols. Some common warning signs are shown on the next slides. This sign warns you that the road ends ahead. Slow down and prepare to safely turn left or right.
What is the first thing a driver should do if the foot brake appears to fail?
What to do When Brakes Fail
- Take your foot off the gas.
- Turn on hazard lights (if you have time).
- Downshift SLOWLY.
- Pump the brake pedal hard and fast.
- Cautiously apply emergency brake.
- (Optional) Use guard rails.
- Steer yourself to safety.
What is a yellow and black sign?
Yellow: Yellow signifies WARNING. Yellow traffic signs stand for slowing down, driving with caution, or a general warning. It may be yellow, or yellow-green with black wording or symbols. This sign warns you about hazards or possible hazards on or near the roadway.
What lane should you be in to take the second exit?
Roundabouts – correct procedure Taking the second exit on a standard 4 junction roundabout would normally mean the left hand lane, but the road marking might say the left lane is for left turn ONLY. The general rule is to watch for the roundabout sign as you approach.
What 4 things can a red sign mean?
Decode the messages of colors and shapes Red: Stop. Yellow: Prepare to stop. Green: Go. Flashing red light: Come to a complete stop and yield to oncoming traffic or pedestrians.
What does the fire exit sign mean?
Fire escape signs are provided to guide you from wherever you are in a building, via a place of relative safety (the escape route) to the place of ultimate safety (the assembly area). It must not be assumed that everyone will know all safe routes through the building.
When going straight at a roundabout should you?
If you wish to go straight on at the roundabout, then don’t signal on approach, but again you keep to the left. Signal left once you pass the exit before the one you want. Take particular care to look into your left wing mirror to make certain you are not endangering others. 4.
Where do fire exit signs go?
Where to Position Fire Exit Signs
- Fire Exit Signs On Stairs. Option 1: progress down to the right as viewed from in front of the sign.
- Fire Exit Signs in Corridors and Building final Exits. Option 1: progress forward and through from here as viewed from in front of the sign positioned above door.
- Fire Exit Signs Above doors.
When entering or exiting a roundabout you must always?
Remember, in a multi-lane roundabout, you must yield to both lanes of traffic. Once a gap in traffic appears, merge into the roundabout and proceed to your exit. Look for pedestrians and use your turn signal before you exit. If there is no traffic in the roundabout, you may enter without yielding.
How many times can you go around a roundabout legal?
It is illegal to circle a roundabout more than 3 times You should plan before you enter a roundabout and circling more than twice could be considered as careless driving.
Which way should the arrow point on a fire exit sign?
Fire exit signs with left and right arrows: If you see an arrow pointing to the left, what that is essentially saying is that you should “Progress to the left”. If you see an arrow pointing to the right, it is telling you that you should “Progress to the right”.
How can you recognize a warning sign?
How should you proceed when you see one? Warning signs are usually yellow and black and diamond-shaped. When you see one, you should be prepared to slow or stop.
What is a mandatory safety sign?
Mandatory safety signs are used to show actions or behaviours that are to be implemented within a workplace or area of public access to comply with relevant health and safety regulations. Consider them the ‘must do’ of safety signs.
What do the 4 Colours on safety signs mean?
Red: Red is reserved for danger signs and labels. Green: Green is safety related and means there is no danger present. This color is commonly used for first aid signs or signs indicating exits. Blue: Provides information about a particular item or area.
Can you exit a roundabout in the right hand lane?
When taking an exit to the right or going full circle (unless signs or markings indicate otherwise): Signal right and approach the exit in the right hand lane. Keep to the right on the roundabout until you need to change lanes to reach your exit.
What Colour should fire exit doors be?
green
What sign should you follow to evacuate?
FIRE ESCAPE SIGNS – Green And White (Safe Condition) Any safety sign that is green with white lettering and symbols is deemed a safe condition sign and is one to be followed in an emergency.
What do blue fire signs indicate?
In the UK, blue fire safety signs are used to indicate a mandatory action. These blue signs require you to carry out an action in order to contribute towards your safety and must be coloured this way according to BS 5499. Blue fire safety signs are circular in shape and feature a white graphic or white text.