How do you clean a kerosene Monitor heater?
Do not use abrasive or flammable cleaners. Periodic cleaning of the inside of your MPI Monitor heater helps to keep the unit running efficiently. Wipe away any excess dust and dirt with a microfiber cloth. Remove the fuel strainer and wash it with fresh, clear kerosene — do not clean it with water.
How do you bleed a kerosene Monitor heater?
10 Steps to Bleed & Restart Your Furnace after Running Out of Heating Oil
- Step 1: Fill the Fuel Tank.
- Step 2: Hit the Reset Button.
- Step 3: Turn off the Furnace.
- Step 4: Collect Your Tools.
- Step 5: Find the Bleeder Valve.
- Step 6: Attach Nylon Tubing.
- Step 7: Turn on the Furnace and Unscrew the Valve.
- Step 8: Tighten the Valve.
What is a kerosene Monitor heater?
Kerosene oil, commonly used with kerosene lanterns, is used to fuel monitor heaters. A monitor heater is an oil-fueled, forced-air home heating system that capitalizes on the principle that hot air rises. Monitor heaters are fueled with kerosene oil, which is far less expensive than electric heat and other fuel oils.
What does EE2 mean on a laser heater?
Toyostove Error Codes For Previous Models Laser 30, 56, 60AT, 73, 73AT, and OM23
| Error Code | Problem | Cause |
|---|---|---|
| EE2 | No Ignition | Clogged fuel strainer |
| EE2 | No Ignition | Ignitger, circuit board, flame sensor or fuel pump malfunction |
| EE8 | No Ignition | Blower motor malfunction |
| EE6 | Extingused after igntion | Air pocket in fuel line |
What do monitor heaters run on?
kerosene oil
Monitor heaters are fueled with kerosene oil, which is far less expensive than electric heat and other fuel oils. The only source of fuel that is slightly less expensive than using the monitor heater is wood, but wood is messy, takes up a lot of space, and the stove must be attended regularly.