How do I connect my Audiosonic Bluetooth speaker?

  January 10, 2021
      No Comments

How do I connect my Audiosonic Bluetooth speaker?

Put BLUETOOTH on at your tower speaker. Then get your phone or tablet go to “settings” click on BLUETOOTH the scan check for the audiosonic to come up. Then click on that NAME.

How do you open a Bluetooth speaker?

Switch on the speaker and long press the Bluetooth button on the device. By pressing the button, your Bluetooth speaker will enter the pairing mode and will be discoverable to other devices.

How do I fix my Bluetooth speaker?

How to Fix a Bluetooth Speaker that Won’t Charge

  1. Install Software Updates.
  2. Replace the Battery.
  3. Buy a New Micro USB Cable.
  4. Repair a Cracked Solder Joint.
  5. Replace the Charging Port.
  6. Replace the Charging Circuit.
  7. Using a Power Bank.
  8. When to Replace your Bluetooth Speakers.

How do you open a Bluetooth speaker without screws?

Speakers With No Screws On The Outer Case You can often pry these speakers open with a thin blade, but there’s another way to take them apart. Use a screwdriver to loosen (but don’t remove) the speaker’s terminals. Then, insert guitar picks between the speaker cone and the magnet. Don’t use paper picks; they’ll break.

How do I connect to my Kmart Bluetooth speaker?

Powering on the Speaker: 1. Press and hold the button. 2. When the prompt tone sounds and the blue LED indicators flashing the speaker is powered on and ready for pairing.

How do I connect my home and co Bluetooth speaker?

Bluetooth Pairing

  1. Turn on the speaker and select Bluetooth mode.
  2. Enable the Bluetooth function and scan on your Bluetooth device.
  3. After a successful paring, a tone will be heard and the LED indicator will stop flashing.
  4. You can press and hold the [ > ] button to unpair your current device and search for new devices.

How do I connect to a Bluetooth speaker?

Android users need to go to Bluetooth Settings and pair either Bluetooth headphones or speakers one by one. Once connected, tap the three-dot icon on the right and click on Advanced Settings. Toggle on the ‘dual audio’ option if not already turned on. This should enable users to connect to two devices at once.

Can speaker be repaired?

There is a variety of issues that can occur with speaker voice coils, and sometimes it is possible to repair them. Occasionally on smaller speakers with no adjustments it can be possible to repair them by easing them back into the centre. Gently hold the cone – remember it is made of paper and can damage easily.

How do you take apart a speaker box?

– One phillips-head screwdriver.

  1. Step 1: Access Slots in the Base of the Speaker Cabinet.
  2. Step 2: Applying Gentle Pressure at the Base of the Speaker Grille.
  3. Step 3: Gently Prying Off the Molded Plastic Speaker Grille.
  4. Step 4: Removing Cone Speaker(s) and Gaining Access to the Speaker Cabinet Interior.

How do I connect two speakers to Kmart?

Before pairing, make sure the secondary speaker is of the same specifications and Bluetooth pairing ID, with Kmart keycode 42787273, 42807087, or 42807070 etc.

  1. Turn on both speakers.
  2. Press twice the [ > ] button on the top of either of the speakers.
  3. A tone will sound after the two speakers are paired successfully.