How do you do a lighting energy audit?

7 Step Do-It-Yourself Lighting Audit

1. Step 1: Identify the location or area type, such as an office space or warehouse.
2. Step 2: Determine the fixture type.
3. Step 3: Record lighting fixture attributes and make notes of any special conditions.
4. Step 4: Calculate your approximate Annual Burn Hours.

What is energy audit checklist?

A general energy audit checklist is used to assess the energy efficiency of an establishment based on equipment, appliances, design, and usage. Certified energy auditors can use this checklist to identify opportunities for energy cost reduction and recommend solutions.

What are the three types of energy audit?

What are the types of Energy Audit?

• Preliminary Energy Audit (Walk-through audit). In a preliminary energy audit, readily-available data are mostly used for a simple analysis of energy use and performance of the plant.
• Detailed Energy Audit (Diagnostic Energy Audit).

What are the four steps of an energy audit?

A systematic energy audit can be broken into four phases: planning, investigating, implementing and sustaining. Proactive facilities strive to continually improve energy efficiency by repeating these phases at regular intervals.

What are the different types of controls used in lighting system?

Here, we explore various lighting control options to support the vision of your lighting arrangement.

• Basic lighting controls.
• Pre-set lighting controls.
• Dimmer switches.
• Occupancy sensors.
• Motion sensor controls.
• Assisted lighting controls.
• Integrated lighting controls.

What is illumination auditing?

A lighting audit is an investigative process that measures conditions against standards to determine where cost-effective changes can be made. Detailed measurements of illumination levels are taken with a lux meter, both at task areas and for general overall lighting.

How do you write an energy audit report?

Keep the summary concise but meaningful. Begin by stating, “An energy audit was conducted on July 13, 2011 at ABC facility.” State in the second sentence the dollar amount of potential electricity cost savings from identified conservation measures.

What is energy audit methodology?

Energy Audit is the key to a systematic approach for decision-making in the area of energy management. It attempts to balance the total energy inputs with its use, and serves to identify all the energy streams in a facility. It quantifies energy usage according to its discrete functions.

What are different types of energy audit?

Types of Energy Audit:

• Preliminary audit: Preliminary audit is carried out in the limited time say within 10 days and it highlights the energy cost and wastages in the major equipment’s and processes.
• Detailed (Comprehensive) Energy Audit:
• Overall system audit:
• Functional audit:
• Utility Audit:
• Modernization audit:

What are the types and methodology of energy audit?

4 Detailed Energy Audit Methodology. This is based on an inventory of energy using systems, assumptions of current operating conditions and calculations of energy use. This estimated use is then compared to utility bill charges. Detailed energy auditing is carried out in three phases: Phase I, II and III.

How do you prepare an energy audit report?

How many stages are there in energy audit?

Detailed energy auditing is carried out in three phases: Phase I, II and III.