How do I identify a Ford cylinder head?

How do I identify a Ford cylinder head?

Look for three different locations where your Ford cylinder head code number will be located: on top of the head under the valve cover; on the bottom of the head, requiring the head to be removed; and on the side of the head just under the valve cover lip.

How do I identify my FE heads?

FE cylinder heads are identifiable by their casting number and date code. This is a C0AE-6090-D cylinder head for 1960 352 and 1961–1962 390. The casting number (bottom arrows) is almost never the same as the Ford part number.

How do I identify a Ford 260 head?

The 260 heads have larger 52- to 55-cc kidney-shaped chambers with the same valve size. Expect to see C2OE-F, C3OE-B prior to February of 1964. In February of 1964, Ford came out with an improved 260 head with larger 1.67/1.45- inch valves along with the same 52- to 55-cc chambers. The revised head is numbered C4OE-B.

How do I identify a 302 head?

Ford 302 Cylinder Head Identification

  1. Number Location. The casting number is located under the valve cover, in the middle of the cylinder head.
  2. Number Decoding. The number within the code identifies the year of manufacture; a head with code C8ZZ-A would have been manufactured in 1968, and so forth.
  3. Other Considerations.

How do I identify a Ford Cleveland head?

A 2V cleveland have a #2 in upper both corners of the cylinder head. A 4V have the #4 in the upper both corners of the cylinder head. If your heads is clevelandstyle but dont have the #2 or 4 its heads for the 400 or 351M.

Are 289 and 302 heads the same?

also it looks like i have the depression all the way in the back, so safe to say ive got 289 block with 302 heads then. unless some one did some tricky stuff and loaded it with 302 guts. Non of those things identify it as a 289 for sure. Pretty much everything is interchangeable between 289/302s….

How do I know if my Ford is a big block?

Locate the engine identification tag on the block. It is usually located on the passenger side of the block near the second cylinder from the front. There are variances to its location, especially in earlier models.

How can you tell the difference between a 351C and a 351M?

There are several external differences that can help to distinguish between the 351W engine and the 351C and M engines: The 351W has three bolts attaching the valve covers on the exhaust manifold side; the 351C,M has four. The 351W has the timing cover bolted to the block.

How do I know if my 351C is 2V or 4V?