Do knobs or handles go on cabinet doors?
The general rule of thumb is that knobs are best for cabinet doors, though occasionally you can break the rules. It doesn’t matter what shape you go with (they come in round, square, oblong, octagonal—you name it), what’s important is they’re placed 2 1/2 or 3 inches from the corner of a door.
Are all white kitchens going out of style?
White kitchen designs have been popular for years because they’re sure to never go out of style, as noted by House Logic. Unlike past kitchen designs — like the early 2000s Tuscan kitchen or the 1970s pea green and orange kitchen — the all-white kitchen is timeless.
What countertops never go out of style?
Quartz countertops from companies such as Caesarstone and PentalQuartz are another good option. Blackband recommends sticking with white or, if you don’t like white, a neutral color, such as tan, beige or ivory. Go with a subtle pattern and low veining for a longer-lasting look.
Should you use pulls or knobs on kitchen cabinets?
Determine If You Want a Knob or Pull. There are no strict rules to follow when choosing whether to select a knob or a pull or both.
Where to place cabinet knobs?
Cabinet knobs and cabinet pulls are typically installed between 2 1/2 and 3 inches from the corner of the cabinet doors furthest from the hinges. For upper cabinets, this is the lower corner; on base cabinets, this is the upper corner.
Where do you put handles on kitchen cabinets?
The cabinet knobs for kitchen base cabinets are placed somewhere between 2.5 and 3 inches down from the upper corner opposite the hinge side of the door. When knobs are placed in these locations, you will discover that your hand comfortably can grab them without your arm stretching.
How to install cabinet knobs and pulls?
– Placement for Use. Cabinet knobs and cabinet pulls are typically installed between 2 1/2 and 3 inches from the corner of the cabinet doors furthest from the hinges. – Use a Template. A cabinet drill template is a piece of plastic that hangs from the corner of the cabinet. – Drill the Holes. Once you know where you want the handles or knobs to be installed, holes need to be drilled for them. – Install the Knobs and Pulls. The knob hardware itself is held in place on the front of the door while the screws are inserted into the hole in the door