What is the correct timing for a 327 Chevy?
The timing setting given is the most common for the 327. If, during a test drive, the engine seems a little sluggish, you can move the timing up two degrees to “6 BEFORE.” If the engine clatters when you accelerate, move the timing down towards the “0” by two degrees.
How fast is a 1966 Corvette?
140 mph
With the short 4.11:1 gearing, 0-60 mph times were recorded in a nearly unbelievable 4.8 seconds, and 0-100 mph in 11.2 seconds, with a blistering top speed of 140 mph….1966 Corvette Specifications.
| Option | Production | Price |
|---|---|---|
| 350 hp Engine FI | 7,591 | 105.35 |
| 4-speed Manual Transmission | 10,837 | 184.35 |
Is a 1966 Corvette a C2?
With the 1966 Corvette arriving after General Motors’ recent, overwhelming success with the 427 Sting Ray, there was no question that the newest Corvette model would continue to feature big-block engines….1966 Corvette Overview.
| Model: | 1966 Corvette |
|---|---|
| Generation: | C2 Corvette |
| Type: | 2 Door Coupe/Convertible |
What year Corvette had a 327?
1965
1965 L79 Production & History So, it was in 1965 that the hot hydraulic cam, L79 327 engine first appeared in the Corvette and the Chevelle. For the record, the L76, 365hp 327 outsold the 350hp L79 in the Corvette, 5011 to 4716.
How do you adjust the ignition timing on a Chevy small-block?
Loosen the distributor hold down nut a little more so the distributor can be turned. Make small movements when turning. Rotate the distributor clockwise to retard the spark slightly, lightly tighten the nut, and check where the timing is with the timing light. Repeat until the target 4 degrees BTDC is achieved.
What engines were available in the 1966 Corvette?
The engines’ official names are 425-hp Turbo-Jet 427 and 390-hp Turbo-Jet 427, respectively. Both V8s use a 4.25” bore and 3.76” stroke. For more crankshaft rigidity, both engines come with extra-wide-base main bearing caps.
How much did a 1966 Corvette cost new?
Of the 27,720 Corvettes Chevy built in 1966, 9,958 were coupes. Base price was $4,295.
How much power can a 327 make?
The lowest rated 327 made 250 hp at 4,400 rpm and 350 lb-ft. of torque at 2,800 rpm. The next level of the 327 produced 300 hp at 5,000 rpm and 360 lb-ft. at 3,200 rpm.