Is a hex key the same as an Allen wrench?
Are hex and Allen keys the same thing? Although there’s always some potential for confusion wherever two different terms are used for the same item, in this case it’s pretty straightforward – to all practical intents and purposes, hex keys/wrenches and Allen keys are indeed essentially the same thing.
Where are PB Swiss Tools made?
Switzerland
PB Swiss Tools is one of the few exporting companies that develops and manufactures all of its products in Switzerland.
How do you improvise Allen keys?
One way to make an improvised allen wrench is to take a plastic ballpoint pen and remove the ink cartridge and writing tip. Then you can take a lighter and gently heat the end of the pen tube with a lighter, being careful not to burn it and soften the plastic.
Where are Bondhus tools made?
Monticello, Minnesota
Bondhus Corporation is located in Monticello, Minnesota – USA; about 40 minutes from Minneapolis. Bondhus employees are proud of our Company and the tools we make. Our Ball, Hex, and TORX® tools are made in our Monticello manufacturing facility, just across the street from the Mighty Mississippi River.
Why do some technicians use Allen keys?
A hex key, also known as an Allen key or Allen wrench, is a small handheld tool that’s used for for driving bolts and screws with a hexagonal socket. They are available in many different sizes, though they all have the same hexagonal-shaped tip. To learn more about hex keys and the benefits they offer, keep reading.
Why do allen wrenches exist?
The primary advantage of Allen bolts over hex bolts is that the tool used to do them up can be smaller than the head itself. So they are perfect for if you have a bolt that’s down inside a narrow opening. You can stick the Allen key down into the hole and do up the bolt.
Can you use a drill instead of an Allen key?
Can I put an Allen wrench in a drill? Yes. You can cut off the branch of the L-shaped hex key.
How do you remove Allen bolts without Allen keys?
How to Remove Allen Head Screws Without an Allen Head Screwdriver
- Try to find a standard screwdriver that fits snugly between two of the points of the screw. It should fit with no wiggle room.
- Get your hacksaw. Put a small toothed blade on the saw.
- Use a standard screwdriver that fits the groove you just made snugly.
Are Bondhus tools any good?
Bondhus hex keys and hex tools are very well built. They might be the last hex tools you ever need. In addition to great quality and reasonable pricing, they’re made in the USA. I like the BriteGuard and GoldGuard finish drivers for hex keys, as they’re easier to clean and feel better in-hand.
Why do Allen keys have a ball end?
The ball end makes it easier to slide the key into the receiving slot. It allows you to reach at an offset 30 degree angle so that you can feel your way to the needed position much faster – great for blind or difficult areas to reach or if the bolt or screw is close to an obstruction on one side.
What is Torx key?
Torx keys are also commonly known as star keys. Like hexagon allen keys, most torx keys are small enough to be carried in a pocket and enable the user to drive the appropriate fasteners without needing a separate screwdriver or power tool.
Why is an Allen wrench called an Allen wrench?
Originally named Allen Manufacturing Company, the business produced hexagonal set screws and wrenches to fasten them. The terms “Allen wrench” (American English) and “Allen key” (British English) are derived from the Allen brand name and refer to the generic product category “hex keys”.